Connectors Inserting & Extracting Testing Machine for Connector
Push Pull Force Testing
Purpose:
Insertion force testing machine apply for the inserting and
extracting test of all kinds of connectors. Equip with automatic
center system and special connecting grips to make sure
to get accurate testing result.
Adopt windows displayer in English program, easy operating,
automatic memory ( torque & angle curve, torque life time curve,
test report ), also
can memorize all the test conditions.
Adopt high precision load cell and drive by servo motor, can get
accurate Inserting & extracting force testing data.
Application:
Connector sets inserting & extracting test
Connector single hole inserting & extracting test
Connector inserting & extracting life-time test
Connector single pin and plastic retention test
Connector normal force test
Connector spring compression test
Connector dynamic impedance test
All kinds of tension & compression test
Characteristics:
Full-automatic test method:
Push & pull force tester machine only needs to input and store the
test conditions of the test piece of a certain batch and the
machine will conduct the compression and
tensile tests automatically;
Widespread application:
With different fixtures, it can be used in various connector tests,
such as the tensile and compression tests and the endurance and
dynamic
impedance tests of R&D and IQC finished connectors. After the
test, it can automatically store the test curves and data;
High precision:
The load resolution can reach up to 0.01gf and the stroke
resolution, 0.001mm.
Unit switchover:
The units of load such as N, gf, kgf and Lb can be switched freely,
so can those of stroke such as mm and cm.
Language switchover:
English, traditional Chinese and simplified Chinese are available,
which shows good applicability.
Large memory space:
The test data (curves and data) can be stored in the computer hard
disc (the data for every test can be stored in it, without no
limitation on the
times).
People-oriented design and user-friendly operation:
All test conditions are set on the computer picture: test load,
stroke, times, speed, waiting time…
People-oriented report design:
The head of the report can be modified (both in English and
Chinese) at any time. The report can be generated automatically.
The machine can
print data and curve reports without your inputting them again.
Automatic test results judging and analysis:
You may input the upper and lower limit specification values of the
compression or tensile load, and the machine can automatically
judge whether
the test results pass or fail and analyze the results.
Roll curve display:
Plug-unplug test machine can automatically generate tensile and
compression curves. The insertion is positive value, while the
extraction, negative value.
Specification:
| Model | IN-I5150 |
| Capacity (optional) | 5kgf, 10kgf, 20kgf, 50kgf, 100kgf |
| Unit (switchable) | Kgf, N, Lb, gf |
| Load accuracy | ±0.5% |
| Min. load display | 0.01 kgf or 0.01gf |
| Test stroke | 0~150mm |
| Min. displacement display | 0.001mm |
| Effective width | 200mm, 400mm ( optional ) |
| Test speed | 0~200mm/min or 0~400mm/min |
| Speed accuracy | ±0.5% |
| Motor | AC servo motor |
| Main unit dimension (WxDxH) | 360x270x950mm |
| Main unit weight | 70kg |
| Power supply | AC220V 10A or specified by user |
Picture:
Factory workshop
FAQ:
- Q: What is the brand name of this product?
A: The brand name of this product is INFINITY. - Q: What is the model number of this product?
A: The model number of this product is IZ1001 Series. - Q: Where is this product made?
A: This product is made in China. - Q: What certifications does this product have?
A: This product is CE and ISO certified. - Q: What is the minimum order quantity for this product?
A: The minimum order quantity for this product is 1 set.
