ID6005 Safety Laminated Glass Shot Bag Impact Testing Machine For
Construction
Download specification: Glass Shot
Bag Impact Testing Machine Specificatio...
Product Description:
Glass shot bag impact testing machine is a testing instrument for testing the impact resistance of tempered glass.
This instrument uses an impact body of the same mass to test the
penetration resistance or strength of tempered glass under impact
at different heights.
The machine consists of a sample holder, a roll-up bracket, a shot
bag and a control frame. The sample holder needs to be installed
against the wall.
The roll-up bracket is installed about 2.5 meters away from the
opposite side of the sample holder.
The wire rope pulls the shot bag to the reduction motor at the
bottom of the roll-up frame.
The control box manually controls the roll-up machine to lift the
shot bag to the required height.
After reaching the height, the manual control switch releases the
bomb bag to achieve pendulum impact.
Suitable for drop weight impact testing of ferritic steels
(especially various pipeline steels).
Technical Parameters:
| Parameters | Value |
| Impact method | Shot bag pendulum impact |
| Swing arm radius | 1530mm |
| impact height | 300~1200mm |
| Impact shot bag weight | 45kg±0.1kg |
| Shot diameter | ∮2.5mm |
| Sample size | H1930xW864mm |
| wooden interior dimensions | H1911xW845mm |
| Specimen fixed frame | The part in contact with the sample is rubber with a shore hardness
of 50 degrees. |
| size(WxDxH) | 1800x3049x2775mm |
| weight | About 700kg |
| power supply | 1∮ AC220V 50HZ 3A or specify |
Test steps for shotgun bag impact testing machine:
1. Lift the impact body with a flexible steel wire rope with a
diameter of 3 mm, so that the outer circumference of the
cross-sectional diameter part of the impact body is less than 13 mm
from the surface of the sample and within 50 mm from the center of
the sample.
2. Keep the center position of the impact body diameter at a drop
height of 300mm, swing it down freely, and impact the sample.1 time
near the heart point. If the sample is not damaged, raise it to
750mm and impact again near the center of the same sample.
3. When the sample is still not damaged, raise it to a height of
1200mm and impact once near the center point of the same sample.
4. When the sample with a drop height of 300mm, 750mm or 1200mm is
destroyed, within 5 minutes after the destruction, select 10 pieces
from the glass fragments and call the mass. And measure the length
that remains within the frame without penetrating cracks.
Customized service
For more info ,or you want to customized a product, please feel
free to contact us,thanks,
Contact us
Mobile/Whatsapp:+86-189-2293-3631
Tel:+86-(0)76987796906
https://www.tester-machine.com/
Infinity Machine International Inc
